Zephyr Fixes Device Driver, Bluetooth and WebSocket Validation Flaws
Quick Answer
Match deployed Zephyr firmware and enabled components to the five advisories. Apply the supported 4.3.2 or 4.5.0 fixes and validate device behavior.
Confirm Scope And Apply The Supported Remediation
What to do now: Collect firmware versions, source revisions, board models and build configuration for ITE IT8xxx2 SHI, DesignWare I3C, Bluetooth ATT/EATT and WebSocket client code. The SHI and I3C issues require attached-host or local-bus interactions. The WebSocket read requires debug logging; the ATT reset depends on idle channels and trapping near-NULL reads. The handshake issue affects protocol validation and does not by itself bypass TLS identity checks. Integrate the project fixes through a supported firmware release or validated vendor backport. Treat 4.4.x builds as affected unless the downstream provider confirms the relevant patches. Disable unnecessary diagnostic logging while planning rollout. Test early host transactions, device-table exhaustion, Bluetooth unsubscribe/cancel paths and malformed WebSocket responses in a controlled environment. Retain firmware hashes, build configuration, backport evidence, device health and regression results.
Last verified: 2026-11-17 UTC. Recheck the authoritative advisory and supported distribution channel before changing production.
Scope And Authority
| Product scope | Zephyr ITE SHI backend, DesignWare I3C driver, Bluetooth ATT and WebSocket client |
|---|---|
| Advisory | GHSA-xqxg-8rx7-42hq / GHSA-5jhj-95j8-x5gf / GHSA-686p-f363-q695 / GHSA-9vrw-g886-pqrf / GHSA-vcpg-3c2r-7mxf |
| CVEs | CVE-2026-93669, CVE-2026-93670, CVE-2026-93671, CVE-2026-93672, CVE-2026-93673 |
| Authoritative release date | 2026-11-16T18:29:28Z — original authoritative release time in UTC. |
| Authority revision date | No separate material advisory revision is confirmed. |
| Affected versions | Component-specific ranges are listed below. All five advisories identify fixes in 4.3.2 and 4.5.0; their 4.4.x range remains affected. Hardware, enabled features and logging configuration determine applicability. |
| Fixed version | Zephyr 4.3.2 or 4.5.0 for the corresponding release line; verify downstream backports and deployed firmware |
| CVSS base score | 5.3 (CVSS v3.1, CVE-2026-93672); individual scores range from 3.5 to 5.3 |
| CVSS severity | Moderate |
| Exploitation status | The cited authority does not confirm exploitation in the wild.; no exploitation claim is inferred. |
What Changed
Five project disclosures address early SHI interrupts, exhausted I3C device tables, WebSocket debug-log over-reads, Bluetooth ATT request lookup and incomplete WebSocket handshake checks.
Advisory-Specific Version Boundaries
| <a href="https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-xqxg-8rx7-42hq">CVE-2026-93669</a> | Affected: >= 3.4.0, < 4.3.2 >= 4.4.0, < 4.5.0. Fixed: 4.3.2 4.5.0. CVSS v3.1: 4.7; Moderate. Published: 2026-11-16T18:29:28Z. |
|---|---|
| <a href="https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-5jhj-95j8-x5gf">CVE-2026-93670</a> | Affected: >= 4.1.0, < 4.3.2 >= 4.4.0, < 4.5.0. Fixed: 4.3.2 4.5.0. CVSS v3.1: 3.5; Low. Published: 2026-11-16T18:55:21Z. |
| <a href="https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-686p-f363-q695">CVE-2026-93671</a> | Affected: >= 2.1.0, < 4.3.2 >= 4.4.0, < 4.5.0. Fixed: 4.3.2 4.5.0. CVSS v3.1: 3.7; Low. Published: 2026-11-16T18:57:46Z. |
| <a href="https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-9vrw-g886-pqrf">CVE-2026-93672</a> | Affected: >= 3.0.0, < 4.3.2 >= 4.4.0, < 4.5.0. Fixed: 4.3.2 4.5.0. CVSS v3.1: 5.3; Moderate. Published: 2026-11-16T19:00:55Z. |
| <a href="https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-vcpg-3c2r-7mxf">CVE-2026-93673</a> | Affected: >= 2.1.0, < 4.3.2 >= 4.4.0, < 4.5.0. Fixed: 4.3.2 4.5.0. CVSS v3.1: 4.8; Moderate. Published: 2026-11-16T21:18:24Z. |
What To Validate Now
- Inventory. Collect firmware versions, source revisions, board models and build configuration for ITE IT8xxx2 SHI, DesignWare I3C, Bluetooth ATT/EATT and WebSocket client code.
- Establish applicability. The SHI and I3C issues require attached-host or local-bus interactions. The WebSocket read requires debug logging; the ATT reset depends on idle channels and trapping near-NULL reads. The handshake issue affects protocol validation and does not by itself bypass TLS identity checks.
- Remediate. Integrate the project fixes through a supported firmware release or validated vendor backport. Treat 4.4.x builds as affected unless the downstream provider confirms the relevant patches. Disable unnecessary diagnostic logging while planning rollout.
- Validate. Test early host transactions, device-table exhaustion, Bluetooth unsubscribe/cancel paths and malformed WebSocket responses in a controlled environment. Retain firmware hashes, build configuration, backport evidence, device health and regression results.
- Retain evidence. Preserve asset and owner identifiers, the applicability decision, before-and-after versions, change approval, installation output, validation results, and any exception or rollback record.
Operational Cautions
Do not infer internet exposure or compromise from these scores. Plan device rollback and recovery before firmware changes; hardware and application behavior can make disruption operationally significant even for lower-scored flaws.
Evidence To Retain
- Exact product, release stream, package or application version, enabled feature, environment, and accountable owner.
- UTC timestamps, authority revision, approved change record, installer or package-manager output, and resulting version.
- Relevant logs and monitoring evidence, test results, exceptions, compensating controls, and rollback decisions.
Related TechGeeks Resources
Authoritative References
Correction policy: If the authority changes affected versions, fixed versions, severity, exploitation information, mitigations, or required action, TechGeeks will update this notice and its verification date.

